Home / All / The production /

8.The production process.

8.The production process.

Update Time:2016/7/26
1.Engineer design
2.Mould master carve the mould with QC check
3.Case-casting components by the mould with QC check
4.Fill ash
5.Polish with QC check
6.Tapping with QC check
7.Drill hole with QC check
8.Clean oil
9.Welding
10.Spray the plastic outdoor powder with QC check
11.Led light with radiator with QC check
12.Assemble with QC check
13.Olding with QC check
14.Clean 
15.Packing with QC check
Keep in touch